Din impulse latching relay, dual stable status, France hot selling, with CE CB, mini mechanical

Group impulse relays
Min. Order 1 piece
Terms of Payment all
Update Time 2019-08-02
Item specifics
Dissipated power (during the impulse)1, 2P: 19 VA
Illuminated PB controlMax. current 3 mA (if > use an ATLz)
Operating thresholdMin. 85 % of Un in conformance with IEC/EN60669-2-2
Duration of the control order50 ms to 1 s (200 ms recommended)
Response time50 ms
Frequency50 Hz or 60 Hz
Maximum number of operations per minute5
Maximum number of switching operation a day100
Insulation voltage (Ui)440 V AC
Pollution degree3
Rated impulse withstand voltage (Uimp)6 kV
Impulse relays are used
● Closing of the impulse relay pole(s) is triggered by an impulse on the coil.
● Having two stable mechanical positions, the pole(s) will be opened by the next impulse. Each impulse received by the coil reverses the position of
the pole(s).
● Can be controlled by an unlimited number of pushbuttons.
● Zero energy consumption.
Technical data
Dimensions (mm)